Are your neon signs too bright for your bar? Want to create mood lighting with your neon. No problem, just replace your existing transformer with a 8kV dimming power supply. This dimming neon power supply puts you in full control of your light with the twist of a dial.UL Listed
Can be mounted directly to metal.
Reduced energy consumption.
No mercury migration. Weight: 2 lbs.
Input Voltage: 120V
Output: 10,000 volts, 35 mA
9 1/2"L x 2 1/2"W x 1 3/4"H
20" GTO cable; 6 foot power cord; on/off pull chain
Warranty: One year
Will regulate itself between 4,000 and 10,000 volts making it optimal for signs of all sizes.
This power supply unit is for INDOOR USE. (May be used for outdoor applications if mounted in metal weatherproof enclosure/box.)
This unit can be installed on either metallic or non-metallic surfaces.
Always provide adequate ventilation to power supply.
Keep overall length of GTO leads under 6 feet (2m).
Always keep a minimum of 1 inch between GTO leads and any metallic surfaces.
When using multiple power supplies on one sign, be sure to keep at least 3 inches between each unit.
Never cross GTO leads.
Never run GTO leads across the power supply.
Keep GTO leads as equal in length as possible.
Always keep installation in conformity with all local electric codes.
Modification of any type including cutting/removing of AC cord, tampering with on/off switch or tampering with casing will void any existing product warranty. NO EXCEPTIONS.